| प्रकार | प्रकार | ||||
|---|---|---|---|---|---|
1.39 36 APK | |||||
आकार: 1.11 MB प्रमाणपत्र: afe45d3dc0a46ae609f58d3833ebcc8fa5e5811c SHA1 हस्ताक्षर: 7cb6c0938bda6d810be96554744697dac70b4d8d आर्किटेक्चर: universal स्क्रीन डीपीआई: mdpi (160dpi), hdpi (240dpi), xhdpi (320dpi), xxhdpi (480dpi) युक्ति: phone | |||||
डाउनलोड Caldwell Ballistic Chronograph APK मुक्त
Ballistic Chronograph app for the Caldwell line of Ballistic Chronographs.
The Ballistic Chronograph app is for use with the Caldwell line of Ballistic Chronographs supporting a 3.5mm (TRRS) line-out serial port.
For best performance - make sure your device is up to date with the latest software updates provided by your manufacturer and/or carrier.
If you are unable to connect your Android device to the chronometer follow these instructions:
With the audio cable disconnected at both ends…
1. Connect the audio cable to the Android device
2. Connect the audio cable to the Chronometer
Chrono USB Support (v. 1.24+)
NOTE: Not all devices support USB. To test if your device has USB support - download and run USB Host Diagnostics by Chainfire from Google Play.
A USB 2.0 A-Male to B-Male Cable + a USB On-The-Go Connector is required. These cables can be purchased through Amazon.com, Radio Shack, and other retailers.
When prompted to Allow the app Chronograph to access the USB device - Select OK.
If you do not see a prompt - check your connection and try again.
If you are unable to connect the device - Please ensure your device has USB support.
For best performance - make sure your device is up to date with the latest software updates provided by your manufacturer and/or carrier.
If you are unable to connect your Android device to the chronometer follow these instructions:
With the audio cable disconnected at both ends…
1. Connect the audio cable to the Android device
2. Connect the audio cable to the Chronometer
Chrono USB Support (v. 1.24+)
NOTE: Not all devices support USB. To test if your device has USB support - download and run USB Host Diagnostics by Chainfire from Google Play.
A USB 2.0 A-Male to B-Male Cable + a USB On-The-Go Connector is required. These cables can be purchased through Amazon.com, Radio Shack, and other retailers.
When prompted to Allow the app Chronograph to access the USB device - Select OK.
If you do not see a prompt - check your connection and try again.
If you are unable to connect the device - Please ensure your device has USB support.
और दिखाओ
नया क्या है
Version 1.39 contains the following changes/updates:
• SMS support removed.
• SMS support removed.
और जानकारी
में अपडेट किया गया
2021-10-07
आकार
1.11 MB
वर्तमान संस्करण
1.39
Android की आवश्यकता है
2.1 and up
सामग्री मूल्यांकन
Everyone
के द्वारा दिया गया
Battenfeld Technologies
डेवलपर [email protected]
APK स्थापित करें
संबंधित
