| Typ | Variante | ||||
|---|---|---|---|---|---|
1.39 36 APK | |||||
Größe: 1.11 MB Zertifikat: afe45d3dc0a46ae609f58d3833ebcc8fa5e5811c SHA1-Signatur: 7cb6c0938bda6d810be96554744697dac70b4d8d Die Architektur: universal Bildschirm-DPI: mdpi (160dpi), hdpi (240dpi), xhdpi (320dpi), xxhdpi (480dpi) Gerät: phone | |||||
Herunterladen Caldwell Ballistic Chronograph APK frei
Ballistic Chronograph app for the Caldwell line of Ballistic Chronographs.
The Ballistic Chronograph app is for use with the Caldwell line of Ballistic Chronographs supporting a 3.5mm (TRRS) line-out serial port.
For best performance - make sure your device is up to date with the latest software updates provided by your manufacturer and/or carrier.
If you are unable to connect your Android device to the chronometer follow these instructions:
With the audio cable disconnected at both ends…
1. Connect the audio cable to the Android device
2. Connect the audio cable to the Chronometer
Chrono USB Support (v. 1.24+)
NOTE: Not all devices support USB. To test if your device has USB support - download and run USB Host Diagnostics by Chainfire from Google Play.
A USB 2.0 A-Male to B-Male Cable + a USB On-The-Go Connector is required. These cables can be purchased through Amazon.com, Radio Shack, and other retailers.
When prompted to Allow the app Chronograph to access the USB device - Select OK.
If you do not see a prompt - check your connection and try again.
If you are unable to connect the device - Please ensure your device has USB support.
For best performance - make sure your device is up to date with the latest software updates provided by your manufacturer and/or carrier.
If you are unable to connect your Android device to the chronometer follow these instructions:
With the audio cable disconnected at both ends…
1. Connect the audio cable to the Android device
2. Connect the audio cable to the Chronometer
Chrono USB Support (v. 1.24+)
NOTE: Not all devices support USB. To test if your device has USB support - download and run USB Host Diagnostics by Chainfire from Google Play.
A USB 2.0 A-Male to B-Male Cable + a USB On-The-Go Connector is required. These cables can be purchased through Amazon.com, Radio Shack, and other retailers.
When prompted to Allow the app Chronograph to access the USB device - Select OK.
If you do not see a prompt - check your connection and try again.
If you are unable to connect the device - Please ensure your device has USB support.
Zeig mehr
Was gibt's Neues
Version 1.39 contains the following changes/updates:
• SMS support removed.
• SMS support removed.
Mehr Info
Aktualisiert in
2021-10-07
Größe
1.11 MB
Aktuelle Version
1.39
Benötigt Android
2.1 and up
Inhaltsbewertung
Everyone
Angeboten von
Battenfeld Technologies
Entwickler [email protected]
APKs installieren
Verwandt
