Type | Variant | ||||
---|---|---|---|---|---|
A1-2021-09-22 117 APK | |||||
Size: 1.94 MB Certificate: 0afadcf2f6fdf2923a6fca869662344885138140 SHA1 signature: 2c4a396681cf7be49222c5847b791529d6afa4ba Architecture: universal Screen DPI: ldpi (120dpi), mdpi (160dpi), hdpi (240dpi), xhdpi (320dpi), xxhdpi (480dpi), xxxhdpi (640dpi) Device: laptop, phone, tablet |
Download SZ Viewer A1: reading DTCs for Suzuki APK free
Use ELM327 for Suzuki-specific (non-OBDII) reading DTCs codes
Developed for Suzuki vehicles SZ Viewer uses specific protocols (via K-Line and CAN) instead of standard OBDII ones. This application can read and reset DTC codes (including extended Suzuki codes and historical errors) of many control modules.
Japanese domestic market (JDM) Suzuki cars are also supported, even if they do not support OBDII protocols.
An ELM327 adapter (Bluetooth or Wi-Fi) version 1.4 or later is required. Fake (so called v2.1 and some v1.5) ELM327 adapters are not suitable to use because they do not support required standard ELM327 commands.
Older (before about 2000 model year) protocol SDL (5V levels, pin #9 of OBDII connector) is not supported because of incompatibility with ELM327.
This application allows to view and reset DTC errors for various control modules: powertrain, engine, AT/CVT, ABS/ESP, SRS, AC/HVAC, BCM, PS, EMCD/4WD/AHL, TPMS. But not all modules can be exist on a tested car.
A HVAC module may display B1504/B150A DTC due to insufficient lighting of sunload sensor during diagnostic procedure. It is not a symptom of sunload sensor malfunction.
Japanese domestic market (JDM) Suzuki cars are also supported, even if they do not support OBDII protocols.
An ELM327 adapter (Bluetooth or Wi-Fi) version 1.4 or later is required. Fake (so called v2.1 and some v1.5) ELM327 adapters are not suitable to use because they do not support required standard ELM327 commands.
Older (before about 2000 model year) protocol SDL (5V levels, pin #9 of OBDII connector) is not supported because of incompatibility with ELM327.
This application allows to view and reset DTC errors for various control modules: powertrain, engine, AT/CVT, ABS/ESP, SRS, AC/HVAC, BCM, PS, EMCD/4WD/AHL, TPMS. But not all modules can be exist on a tested car.
A HVAC module may display B1504/B150A DTC due to insufficient lighting of sunload sensor during diagnostic procedure. It is not a symptom of sunload sensor malfunction.
Show more
What´s new
A1-2021-09-22
Supporting "OBDII v1.5" adapters.
A1-2021-05-28
Some DTC, modules support.
A1-2021-02-08
Bar (a unit of pressure) for TPMS tab.
A1-2021-01-20
CAN-UDS module params (SRS, 4WD).
A1-2020-12-21
TPMS tab.
A1-2020-10-25
AT/CVT CAN-UDS supported (DTC reading).
A1-2020-05-07
Wi-Fi ELM327 adapter host:port configuration.
A1-2020-02-29
Demo mode to examine the app without a vehicle and an ELM327-adapter.
A1-2020-01-22
ELM327 v1.3/v1.3a support.
Supporting "OBDII v1.5" adapters.
A1-2021-05-28
Some DTC, modules support.
A1-2021-02-08
Bar (a unit of pressure) for TPMS tab.
A1-2021-01-20
CAN-UDS module params (SRS, 4WD).
A1-2020-12-21
TPMS tab.
A1-2020-10-25
AT/CVT CAN-UDS supported (DTC reading).
A1-2020-05-07
Wi-Fi ELM327 adapter host:port configuration.
A1-2020-02-29
Demo mode to examine the app without a vehicle and an ELM327-adapter.
A1-2020-01-22
ELM327 v1.3/v1.3a support.
More info
Updated in
2022-03-27
Size
1.94 MB
Current version
A1-2021-09-22
Requires Android
Varies with device
Content Rating
Everyone
Offered By
Anton Malykh
Developer [email protected]