Tipo | Variação | ||||
---|---|---|---|---|---|
1.4 17 APK | |||||
Tamanho: 18.15 MB Certificado: abb08427f4a12dfd26700a5e4a7d70f61f0611f0 Assinatura SHA1: 1994e63786a9e822df09d37e24496888c250fc96 Arquitetura: universal DPI da tela: ldpi (120dpi), mdpi (160dpi), hdpi (240dpi), xhdpi (320dpi), xxhdpi (480dpi), xxxhdpi (640dpi) Dispositivo: phone |
Baixe ESP8266 Loader (Blynk Uploader) APK grátis
Android App for flash ESP8266 development board via USB OTG or WiFi (OTA).
https://www.instructables.com/id/Make-Blynk-Switch-IoT-4CH-Only-Use-Smartphone-ESP8/
A tool runs on Android platform to create an IoT project easy.
Makes it easy to upload binary file (result of compiled Arduino IDE) to any Expressif ESP8266 development board via USB OTG or WiFi (OTA).
Features:
★ Upload/Flash bianry file via USB OTG
★ Upload/Flash bianry file via WiFi (OTA)
★ Support any USB chip: CDC/ACM, FTDI, PL2303, CH34X and CP210X
★ Serial Monitor for debuging
★ Change the Blynk token, SSID & password automatically durring upload
★ No Ads (Pro version)
★ Access to Google Drive storage (Pro version)
★ Multiple upload widgets button (Pro version)
Note:
- Your device must support USB Host OTG, otherwise the program will not work
- Use good quality OTG adapter/cable, otherwise the uploading failure
- If you get error: "Failed download. Check network connection." You can try to download the required file manually from this link:
https://github.com/bluino/ESP8266Loader and https://github.com/bluino/ESP8266Loader_extra
then extract it to internal storage, so that you will have the /sdcard/ESP8266Loader folder.
Warning: Try it on your own risk, it can damage your hardware (Android or ESP board) or lead to data loss (binary file or any Android data).
A tool runs on Android platform to create an IoT project easy.
Makes it easy to upload binary file (result of compiled Arduino IDE) to any Expressif ESP8266 development board via USB OTG or WiFi (OTA).
Features:
★ Upload/Flash bianry file via USB OTG
★ Upload/Flash bianry file via WiFi (OTA)
★ Support any USB chip: CDC/ACM, FTDI, PL2303, CH34X and CP210X
★ Serial Monitor for debuging
★ Change the Blynk token, SSID & password automatically durring upload
★ No Ads (Pro version)
★ Access to Google Drive storage (Pro version)
★ Multiple upload widgets button (Pro version)
Note:
- Your device must support USB Host OTG, otherwise the program will not work
- Use good quality OTG adapter/cable, otherwise the uploading failure
- If you get error: "Failed download. Check network connection." You can try to download the required file manually from this link:
https://github.com/bluino/ESP8266Loader and https://github.com/bluino/ESP8266Loader_extra
then extract it to internal storage, so that you will have the /sdcard/ESP8266Loader folder.
Warning: Try it on your own risk, it can damage your hardware (Android or ESP board) or lead to data loss (binary file or any Android data).
Mostrar mais
O que há de novo
- Bug fixes on uploading process via USB & OTA.
Mais informações
Atualizado em
09/01/2022
Tamanho
18.15 MB
Versão atual
1.4
Requer Android
4.1 ou superior
Classificação
Everyone
Oferecido por
Bluino Electronics
Desenvolvedor [email protected]